Electric Pool Heater 3KW 220V Swimming Pool Thermostat SPA Water Bath Heater

Description: The Electrical pool heater is designed specifically for the needs of the Jacuzzi. The thermostat can keep the water temperature between 20℃-40℃(68℉-104℉) adjustable, set a most comfortable bath temperature. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating, and protect users against danger. Please strictly follow the instructions before use. Features & Details: 【SMART THERMOSTAT】 – The thermostat comes with a temperature probe, which can sensitively sense the temperature of the pool water. The heating can automatically adjust to the set value of the thermostat. Adjustable temperature range of 20℃-40℃(68℉-104℉), time can be freely set. 【SAFE & RELIABLE】 – Once the flow is small or not enough water pressure, the water inside the thermostatic switch will automatically disconnect the power to prevent damage to the machine. Enhance the safety and service life of the swimming pool thermostat heater. 【DURABLE MATERIAL】 – The inner tank of the thermostat is stainless steel, and it has a long service life without rust. Internal use of international cables, in line with international standards, without having to worry about product quality problems during use. 【SIMPLE OPERATION】 – The internal circulation of the water heater is smooth, with no scum. It is easy to disassemble. After the correct installation, the user rotates the control switch to set the temperature and the heating indicator lights. The water will automatically heat up to the level set by the user and maintain the temperature. 【MULTIPLE USAGES】 – Jacuzzi water heater operation is fully automatic and easy to use. It is suitable for heating constant temperature systems such as small hot springs, swimming pools, and jacuzzis. Specifications     Material: Metal     Voltage: AC 220-240 V / 50-60 Hz     Power: 3 KW     Current: 14 A     Wire:0.12″ x 0.16″ ( 3 x 4 mm² )     Pipe Dimeter: 1″ (2.54 cm )     Size: 10.4″ x 4.9″ x 4.9″(264 x 125 x 125 mm)     Net Weight: 4.4 lbs (2 kg)     Phase Parameters: Single Phase     Suitable For: Max 2 cbm Hot Tub & Swimming Pool Equipment Note: Do not place any electrical appliances within 1.5 meters of the thermostat. Do not use the thermostat in saltwater, acid water, or alkaline water. Do not use a thermostat where chemically aggressive gases or solvents. Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves. Temperature heaters should be used with 500W or higher circulating water pumps for normal use. Please use it along with the circulating water pump of different specifications, rather than alone. Do not use it without water. It must be connected to the pool with water for use. It is assembled with cable wire, but without a plug, so the power cord is needed. As the power is high, you’d better use it with independent sockets, rather than the plug board. Package Included: 1* Pool Thermostat Brand: SHANNA Manufacturer Part Number: SH-1178 Assembled Product Dimensions (L x W x H): 10.40 x 4.90 x 4.90 Inches